360° Beam Angle R23 LED Silicone Neon Flex |
---|
- Part No.: DP-S-NF-24V-R23
- Input voltage: DC24V
- Power/M: 16W/M-19.2W/M
- IP grade: IP65
- Viewing Angle: 360°
- Color: 2400K-6500K, R, G, B, Y, O, RGB
- Working length: 5m-one end powered
- Warranty: 5 years indoor, 3 years outdoor

Features
- 360° Beam angle , uniform light emission in all directions
- Adopt high quality components design to achieve reliable performance
- Unique extrusion process and electronic design can be bended in any way
- Excellent flexibility for proper bending while easy to be modeling
- IP grade: Silicone extrusion, IP65 protection.
- Multiple spec options, custom the neon strip according to the coding rule
- UL, CE, RoHS certification, longer life span with 5 years indoor, 3 years outdoor
- Customization: multiple spec options, can be customized upon requirements
Specification
Model No. | DP-S-NF-24V-R23 | |
Optional | Single color | RGB |
Voltage | DC24V | DC24V |
Power | 16W/m | 19.2W/m |
LED TYPE | SMD2835 | SMD5050 |
LED QTY | 336pcs/m | 288pcs/m |
CRI | Ra80+/Ra90+ | / |
Color | 2400K,2700K,3000K,4000K,5000K,6500K Red, Green, Blue, Yellow, Orange | RGB |
Cuttable Length | 35.7mm | 41.6mm |
Max Run length | 5m | 5m |
Beam angle | 360° | |
Bending Diameter | Φ120mm (360° Bending) | |
IP Rating | IP65 | |
Working Temperature | -20~+60℃ | |
Storage Temperature | -20~+70℃ | |
Warranty | Indoor 5years, Outdoor 3years |
Dimension

The size is: R=23mm

Minimum bending diameter in 120mm

Optical Distribution Diagram
Note: for the data of other color temperature and spec, please consult sales rep.


Accessories

end cap with hole

end cap without hole

Clips

Screws
Installation Method

Plastic Clip

Ceiling Kit – PC groove

Pendant Kit – steel cable and PC groove

Pendant Horizontal Kit – hardware and PC tube set

Ceiling Kit – hardware set

Pendant Kit – output wire two in one

Ceiling Kit – hardware and PC tube set

Pendant Kit – hardware and PC tube set

Pendant Kit – hardware and PC tube set

Pendant Kit – steel cable and hook

Pendant Kit – pole and hook

Splice set
Controller wiring diagram

Packaging info

1.Neatly Roll the checked product

2. Tie the product with PE film, then put into the static shielding bag

3. Package the sealed bag into the inner box

4. Put the inner box into the outer box

5. Seal the outer box horizontally and vertically with sealing glue, label the outer box

6. Belt the box, add edge protectors if necessary
Application Picture

Statements
- All installation and connection must be conducted by professional electrician
- DC24V class2 Power Supply must be used with this light. Make sure to use appropriate PSU
- Ensure the overall length of the S neon type flex does not exceed the maximum run length as 5m-one end powered
- Above-referred data is from our standard product. Please subject to your actual product data if there is difference
- Disconnect power before installing or servicing to avoid electrical shock
- Please refer to the product manual before installation
- No notice for updated of this product
- DAYUP reserve the final interpretation of the specification