Skyline Kit System DP-LB-SL10/20 |
---|
- Part No.: DP-LB-SL10/20
- Length: 10m/20m
- Contents in package: Mounting bracket + accessory kit + LED strip light + Steel strip
- Recommend to use the LED Strips light in 10mm width of less than 10mm width
Features
- Skyline Kit System is a spatial concept; it is continuous light, A thin strip made of stainless steel a mere 15 mm in width “cuts” the space to produce indirect
light. It is possible to adapt Skyline Kit System to various situations, stretching it from wall to wall or ceiling to floor, according to one’s taste or needs. It comes in strips up to 30m in length- can be cut into any desired length - The straightening direction of the steel strip should be maximum 25 degree with the z-axis of the mounting surface
- In order to offer various choice and can meet different requirement of installation space, the Ribbon Uplighter Kit System do not include the LED Strip light & the steel strip. So please advise the type of LED strip light and the length when placing order. We will put the full set(including the strip light and steel strip) into the package
- Recommend to use the LED Strips light in 10mm width of less than 10mm width
- Patented design fixed parts, easy to install and flexible
Specification
Model | Length | Color | Lighting source | CRI | CCT |
DP-LB-SL10 | 10m | White/Black | PCB width≤10mm | Ra80+/90+ | 2200K-6500K |
DP-LB-SL20 | 20m | White/Black | PCB width≤10mm | Ra80+/90+ | 2200K-6500K |
Profile Drawings

Mounting bracket

Steel strip

Skyline kit system

Mount the magnetic baffle after testing

Installation space drawing

General installation mode

Single side tilt installation mode

Double sides & same direction installation tilt mode

Cable-stayed bridge installation mode

Double sides & opposite direction tilt installation mode
Packing info


Application Picture





Statements
- All installation and connection must be conducted by professional electrician
- DC24V class2 Power Supply must be used with this light. Make sure to use appropriate PSU
- Ensure the overall length of the S neon type flex does not exceed the maximum run length as 5m-one end powered
- Above-referred data is from our standard product. Please subject to your actual product data if there is difference
- Disconnect power before installing or servicing to avoid electrical shock
- Please refer to the product manual before installation
- No notice for updated of this product
- DAYUP reserve the final interpretation of the specification